Light truck blockage
轻卡车堵板 在冲压过程中，尤其是在冷锻冲压加工过程中，温度会很快升高， 加润滑产品润滑，如果不使用润滑而直接冲压，除工件光洁度受到影响外，模具寿命将缩短，同时精度降低，为此模具方面的改进将投入大量费用。正是由于此种原因，所以在冷锻冲压中 要冲压润滑产品。在金属冲压成型方面，很薄的一层爱美可水基冲压润滑剂就可以保护模具，因此润滑剂用量会减少50%以上，而且避免了用量过多带来的浪费，还解决了车间整洁问题。模具在冲压过程中由于摩擦会产生热，这种的润滑剂会自动粘着于受热的关键部位，保护模具，平均减少25%的模具抛光停机时间。焊接-组装，表面没有油的部件便于焊接和组装。研究和实践表明金属极惰性气体电弧焊，钨极气体保护电弧焊，电阻焊的应用上都有上佳结果。
Glass lifter stamping parts series
Light Truck Blocker Series
New Energy Sheet Metal Parts Series
New energy vehicle parking bracket series
Dust collector series
Analysis and Application of Stamping Parts and Precautions for Mold ForgingTo deal with problems caused by materials, manufacturing personnel can choose appropriate p...
Key points of mold and tooling management for metal stamping equipment and moldRegular maintenance is implemented for tooling molds, and a mandatory pre repair system is ...
Factors affecting the management of production materials and defects in stampingStrengthen the control and supervision of incoming stamping parts. For the stamping worksho...
Modernization process upgrade and quality process monitoring management of metalThe manufacturing process level of chassis stamping parts in automobile production not only...
Quality improvement measures and reasonable selection of equipment for metal staStamping technology can be divided into two categories: separation process and forming proc...
