toothed plate
The produced gear plates are automotive components, and automotive components, as the foundation of the automotive industry, are the factors supporting the sustainable and healthy development of the automotive industry. Especially in the current booming and vigorous development of independent and innovative industries in the automotive industry, a component system is needed as support. The autonomy of the entire vehicle and the need for components as the foundation, as well as the independent innovation of components, have a driving force for the development of the entire vehicle industry. They are interdependent and interact with each other. Without the autonomy of the entire vehicle, the innovation capability of the component system is difficult to unleash. Without the support of the component system, the independent growth and strength will be difficult to sustain. Key points for replacing automotive parts:
1、 Try to use sealant as much as possible, and paint can be used as a substitute to achieve the desired sealing effect;
2、 Before assembling rubber seals, the appearance quality should be carefully inspected; Use specialized tools for compression fitting to avoid deformation caused by knocking;
3、 Add lubricating grease according to regulations, regularly clean and unclog ventilation holes and one-way valves, etc;
4、 Assemble under extremely clean conditions, with no bumps, scratches, burrs, or other attachments on the working surface of the parts;
5、 Strict operating procedures, seals should be installed correctly to prevent deformation if not in place;
6、 Master the performance specifications and usage requirements of seals, and replace faulty parts in a timely manner;
7、 For thin-walled parts with edge covers, sheet metal cold work correction is used; Shaft hole parts that are prone to wear can be processed using techniques such as metal spraying, welding repair, adhesive bonding, and mechanical processing to achieve the original factory size;
8、 If the nut thread breaks or becomes loose, replace it with a new one and tighten it to the specified torque.
Glass lifter stamping parts series
Light Truck Blocker Series
New Energy Sheet Metal Parts Series
New energy vehicle parking bracket series
Dust collector series
Analysis and Application of Stamping Parts and Precautions for Mold ForgingTo deal with problems caused by materials, manufacturing personnel can choose appropriate p...
Key points of mold and tooling management for metal stamping equipment and moldRegular maintenance is implemented for tooling molds, and a mandatory pre repair system is ...
Factors affecting the management of production materials and defects in stampingStrengthen the control and supervision of incoming stamping parts. For the stamping worksho...
Modernization process upgrade and quality process monitoring management of metalThe manufacturing process level of chassis stamping parts in automobile production not only...
Quality improvement measures and reasonable selection of equipment for metal staStamping technology can be divided into two categories: separation process and forming proc...
