Welding smoke dust collector
Working principle of welding smoke dust collector and smoke purifier: The smoke and exhaust gas are sucked into the settling chamber inside the purifier (dust collector) box through the vacuum suction pipe by the negative pressure of the fan. By gravity, the coarse particles of smoke and dust fall into the bottom dust collector, and the fine particles of smoke and dust are captured on the outer surface by the membrane filter element. The gas is removed by the activated carbon filter, and the clean gas is decomposed and purified through multiple layers of filtration before being discharged from the air outlet. Widely used in industries such as machinery, hardware, electricity, electronics, optoelectronics, chemical engineering, tobacco, pharmaceuticals, food, biology, and other places with smoke and dust pollution. Adopting a movable universal vacuum tube, the suction position can be adjusted up, down, left, and right freely, starting from the source of smoke and dust.
Corresponding filter media can be selected according to the properties of smoke and dust to meet the purification treatment of different types of smoke and dust. Chemical properties such as smoke and dust are filtered using activated carbon, while electrostatic adsorption filtration is required.
Compact structure, lightweight volume, flexible mobility, and easy cleaning and replacement of filter elements. In addition, the box structure can also be customized. Equipped with a low-noise centrifugal fan, it has a large suction volume and low working noise.
Welding smoke dust collector is used for purifying smoke and dust generated in welding, polishing, cutting, grinding and other processes, as well as for recycling metals and precious materials. It can purify a large amount of small metal particles suspended in the air that are harmful to the human body. It has the characteristics of purification, low noise, flexible use, and small footprint.
The welding smoke dust collector is suitable for workplaces that generate smoke such as arc welding, carbon dioxide shielded welding, MAG welding, carbon arc gas gouging welding, gas fusion cutting, and welding.
The welding smoke dust collector uses the gravitational force of the fan, and the welding smoke exhaust gas is sucked into the equipment inlet through the universal vacuum hood. A flame arrester is installed at the equipment inlet, and sparks are blocked by the flame arrester. The smoke and dust gas enter the settling chamber, and by gravity, the coarse dust is first directly dropped into the ash hopper. The fine smoke and dust are captured on the outer surface by the filter element. After being filtered and purified by the filter element, the clean gas flows into the clean room from the center of the filter element. The clean air is further purified by the activated carbon filter and discharged through the outlet to meet the standard.
Glass lifter stamping parts series
Light Truck Blocker Series
New Energy Sheet Metal Parts Series
New energy vehicle parking bracket series
Dust collector series
Analysis and Application of Stamping Parts and Precautions for Mold ForgingTo deal with problems caused by materials, manufacturing personnel can choose appropriate p...
Key points of mold and tooling management for metal stamping equipment and moldRegular maintenance is implemented for tooling molds, and a mandatory pre repair system is ...
Factors affecting the management of production materials and defects in stampingStrengthen the control and supervision of incoming stamping parts. For the stamping worksho...
Modernization process upgrade and quality process monitoring management of metalThe manufacturing process level of chassis stamping parts in automobile production not only...
Quality improvement measures and reasonable selection of equipment for metal staStamping technology can be divided into two categories: separation process and forming proc...
