Black painted parts
Performance of water-based coatings for black painted parts
Based on specific production conditions, the water-based spray (immersion) paint should be considered in the following five aspects:
1、 The coating performance is not lower than or even higher than the solvent based coatings currently used;
2、 The construction performance should be as close as possible to solvent based coatings (i.e. requirements for on-site temperature and humidity);
3、 Utilize existing painting equipment as much as possible without the need for major modifications;
4、 Minimize solvent content as much as possible;
5、 The overall cost is comparable to solvent based coatings.
When selecting materials, first choose metal materials with different mechanical properties based on the type and usage characteristics of automotive stamping, in order to achieve the goal of both product quality and material conservation.
Usually, the following principles should be followed when selecting materials for automotive stamping parts:
a、 The selected material should first meet the performance requirements for the use of automotive components;
b、 The selected material should have good processability;
c、 The selected materials should have good economic viability.
Glass lifter stamping parts series
Light Truck Blocker Series
New Energy Sheet Metal Parts Series
New energy vehicle parking bracket series
Dust collector series
Analysis and Application of Stamping Parts and Precautions for Mold ForgingTo deal with problems caused by materials, manufacturing personnel can choose appropriate p...
Key points of mold and tooling management for metal stamping equipment and moldRegular maintenance is implemented for tooling molds, and a mandatory pre repair system is ...
Factors affecting the management of production materials and defects in stampingStrengthen the control and supervision of incoming stamping parts. For the stamping worksho...
Modernization process upgrade and quality process monitoring management of metalThe manufacturing process level of chassis stamping parts in automobile production not only...
Quality improvement measures and reasonable selection of equipment for metal staStamping technology can be divided into two categories: separation process and forming proc...
