What are the stamping methods for stamping parts

1. The stamping separation process, also known as punching, aims to separate the stamped parts from the sheet metal along the contour line, while meeting the quality requirements of the separation section. The purpose of the forming process is to cause plastic deformation of the sheet metal without breaking the billet, and to produce workpieces of the desired shape and size. In actual production, multiple processes are often integrated into one workpiece.

2. Stamping, bending, shearing, deep drawing, bulging, spinning, and straightening are several main stamping processes for stamping parts. The surface and intrinsic properties of stamping sheet metal have a significant impact on the quality of stamped products, requiring stamping material thickness and uniformity; The surface is smooth, without scars, scratches, surface cracks, etc; Uniform yield strength without obvious directionality; High uniform elongation rate; Low yield to strength ratio; Low work hardening.

The above is the relevant knowledge about stamping parts that I have shared with you, hoping to be helpful to those who are confused in this area.