How to select materials for small and medium-sized stamping parts in automotive

Automotive stamping parts, in simple terms, are a type of component used in automobiles that is formed through stamping. They account for a large proportion of automotive parts and play an important role. So, based on this, let's take a closer look at automotive stamping parts. At the same time, this is also the foundation for familiarizing oneself with other components of the car.

Regarding the specific types of automotive stamping parts, in simple terms, they include many, such as brackets, end caps, covers, oil seal seats, impellers, lugs, and brackets, all of which belong to stamping parts because they are all stamped. In addition, based on its size, we can divide it into two types: large stamping parts and small stamping parts.

For small stamping parts in automobiles, materials such as SPHE, SPHC, ST12, and DC01 are usually used, with DC01 and ST12 being the most commonly used. However, for this job, we should still follow some principles, which are mainly:

Principle 1: It should be able to meet the performance requirements and usage requirements of the components. It can be implemented for different usage requirements.

Principle 2: Stamping parts should have good processability and good economic performance, so that stamping and other processes can be carried out.

In addition, in specific operations, the mechanical properties of materials should be selected and determined based on the type of automotive stamping parts and their usage characteristics. Due to different materials, their mechanical properties are different. Only by choosing the right one can we achieve good product quality and save money. Then proceed to make specific determinations in order to select the appropriate one.

From this, we can see that there cannot be any carelessness in the selection of materials for automotive stamping parts, as it is very important and can affect the use of automotive components. Therefore, this task should be done well. Moreover, to some extent, the correct and reasonable selection of automotive stamping parts is the foundation and key step for subsequent good use, and cannot be taken lightly.