What are the requirements for stamped parts

1. When stamping parts, tighten the screws and stop the machine after 4 hours to check if the screws are loose.

2. When there is a problem with the stamping mold during the production process and it does not need to be removed, it is necessary to first turn off the power of the injection molding machine and hang a maintenance sign on the power box before repairing the mold.

3. All stamping tools should be returned to the toolbox after use and should not be placed on the machine to prevent the tools from slipping and injuring people.

4. When the stamping machine is not in production, the power supply should be cut off in a timely manner.

5. When stamping small parts, specialized tools should be used and direct feeding or picking of parts by hand is not allowed.

6. Stamping parts producers should stand appropriately, maintain a distance between their hands and head and the punch press, and always pay attention to the action of the punch press. It is strictly prohibited to chat with others.

7. Operators and mold repairers are strictly prohibited from inserting their hands into the mold during stamping production.

8. Stamping operators are strictly prohibited from reaching their hands onto the motor to clean up waste when installing the suction fan.