The process of separating stamped parts, also known as punching, aims to make the stamped parts pass through the process& nbsp; The contour line is separated from the sheet metal, and the quality requirements for separating the cross-section are met. The
Stamping & nbsp; Measures: Semi automatic and manual punching machines& nbsp; Install a dual hand brake switch, and it is strictly prohibited to press the pedal or one handed start switch.
When there is a problem with the stamping mold during the production process and it does not need to be removed, it is necessary to first turn off the power of the injection molding machine and hang a maintenance sign on the power box before repairing the
60-70% of the world's steel is sheet metal, with the majority being stamped into finished products. The body, chassis, fuel tank, radiator fins of automobiles, the steam drum of boilers, the shell of containers, the iron core of motors, and the silicon st
The surface and intrinsic properties of the sheet metal used for stamping have a significant impact on the quality of the stamped product, and the thickness of the stamping material is required& nbsp;、 Uniform; The surface is smooth, without scars, scratc
Wipe the surface of the outer cover clean with clean gauze. The inspector needs to wear touch gloves and touch the surface of the stamped part along the longitudinal direction, which depends on the inspector's experience.
